View Single Post
  #1  
Old 10-28-2012, 07:00 PM
Jeff in Pa's Avatar
Jeff in Pa Jeff in Pa is offline
Grand Member
 
Join Date: Feb 2012
Location: Zionsville, PA
Posts: 3,171
Default Parts by Jeff-sleeve hitch, PTO buttons and custom parts

I make a large variety of parts for Cub Cadets. I can make custom parts too. All parts are made by myself, I'm a machinist / fabricator with over thirty years experience.

Please contact me by: PM or E-mail at: JRDerstine@gmail.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~
Heavy duty sleeve hitch adapter with two drilled lifting straps or two slotted lifting straps

$110 plus shipping
$125 plus shipping with one set of drilled and one set of slotted straps

Add a Lift Pin for an additional $10
triple drilled lift pin for an additional $15
Extended length to clear tiller mount add $5
I can make these custom length if needed.

~~~~~~~
Lift Pin for rear lift casting, double hole. I drill these so they can be positioned with the holes vertical or horizontal. They are secured with a 3/16" cotter pin and also have a cotter pin where it goes thru the casting.

$17 plus shipping

triple drilled long length available too
~~~~~~~~~


Height adjuster Knob for 1/1A/2A tillers using 1/2-13 threaded rod. Has correct milled radius on bottom to match rear lift pin.



$18 plus shipping
~~~~~~~~~~~

1/2-13NC threaded rod for use with above knob ( or factory knob )

$6 plus shipping
~~~~~~~~~

Brass PTO button

$5.50 each plus shipping

~~~~~~~

Pair of "frankenstein" bolt and nuts for WF rear lifts

$30 plus shipping

~~~~~~~~~

Pair of straps for the front of the QA mounts. No more fumbling with bolts,nuts and washers. Slide these in the hole and secure with a 1/2-13NC in the factory welded nut inside the frame.


$12 plus shipping

~~~~~~~~~~~

Solid Motor Mounts for QL & WF tractors, with washers, Grade 8 flanged bolts and nylock nuts.

$40 plus shipping for set of four.




~~~~~~~~~~~
Headlight rings for 1X2/1X3/1X4/1X5


$32 per pair plus shipping

~~~~~~~~~~~
See later posts for original lift pin and QA36 / QA42 / QA36A / QA42A belt tensioner adjustment parts

~~~~~~~~~~~~~

If you order more than one item, I will do my best to keep shipping costs as low as possible.


All parts manufactured by me and mailed from the Palm,PA post office
Please either PM or email me
Thanks
Jeff