Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-21-2024, 01:49 PM
CAO65 CAO65 is offline
Senior Member
 
Join Date: Sep 2013
Location: Maryland
Posts: 106
Default Transmission Questions

It's been a long time since my last post.

I have a GT 2000, and it started to leak transmission fluid. I messed around with it today after cutting grass, and the source of it seems to be coming from above the plate that actuates the bypass valve to allow tractor to be pushed in neutral. Between valve and plate there was a lot of built up gunk. I cleaned it, and pushed the plate upwards several times to actuate the bypass valve. It seemed to stop the leak for now maybe the fluid cooled and flows less. Could the built up gunk push or caused the valve to leak? About 6 years ago, the valve was stuck, and I was able to get it moving again by taking it out. It was stiff. Any thoughts? Also does anyone have suggestions on transmission fluid that's cheaper than Cub Cadet transmission fluid for this tractorHydroGear? Thanks.
Reply With Quote
  #2  
Old 04-21-2024, 06:59 PM
Ozcubowner's Avatar
Ozcubowner Ozcubowner is offline
Senior Member
 
Join Date: Apr 2012
Location: outskirts of Sydney NSW Australia
Posts: 905
Default

There are a swag of posts on here about Hydrostatic oil
Oz
__________________
My wife says I do not listen , at least I think thats what she said
Reply With Quote
  #3  
Old 04-23-2024, 05:36 AM
Oak's Avatar
Oak Oak is offline
Senior Moderator
 
Join Date: Jun 2009
Location: Georgia
Posts: 5,081
Default

This should be the manual for your transmission. It explains your options for oil.

https://www.hydro-gear.com/wp-conten...N-50327_P6.pdf
__________________
This ain't no hobby....it's an addiction
Reply With Quote
  #4  
Old 04-23-2024, 09:47 PM
CAO65 CAO65 is offline
Senior Member
 
Join Date: Sep 2013
Location: Maryland
Posts: 106
Default

So I took the nut off of the bypass valve and replaced the o-ring around it with a HNBR o-ring from an assorted pack from Harbor Freight. Hopefully, that will stop the leak. I chose that type of o-ring due to its higher temperature range, but it looks like the one I replaced was a run of the mill rubber o-ring. The HNBR o-ring was harder and less elastic. I wonder if I should have just put a regular rubber o-ring in instead.
Reply With Quote
  #5  
Old 05-03-2024, 09:26 AM
CAO65 CAO65 is offline
Senior Member
 
Join Date: Sep 2013
Location: Maryland
Posts: 106
Default

Well, the leak is still persistent, but it's somewhere below the bypass valve. At some point, one must know their limitations. I had the dealer come get it, but it will be several days before I know anything. Meanwhile, the grass is growing like crazy.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.