Three big guys and a 4WD ATV pushing!!

Luckily, it was drizzling rain, the steel trailer bed let us spin them.

:Bowdown2: And some Tebowing!! :biggrin2:

Ben, the 982 looks sweet! Where did you find the new cat0 at?

Dan sweet decal work!

CAD, you packed them in there tight!

Hauled a little next seasons wood through the mud and never thought wheeling with a cub would bring a big smile when it slipped around but just kept pulling! Biggest part of the slip n slide was just behind the trailer in the pic

http://i74.photobucket.com/albums/i2...-21-13_511.jpg

Adam, sweet mudding pic!

Thanks! The cat 0 is off the 1882
looks like a good load of wood! Is your saw a Farm Boss?

Great pic, Adam! Love the muddy tires on your 149! :beerchug:

Todd aka Oak made the trip from GA yesterday and today we got some seat time on the 1200, 100 and 125 FEL. The camera batt died so not many pics.:bash2::bash2::bash2:

Here's pics of Todd on the 125 FEL playing in the garden.:biggrin2: Evan took a pic of us so we could post it on the site.:beerchug: Todd is on the left and me on the right. Jenn has been feeling under the weather so they sat this one out. We missed them but knew they would want us to get some seat time for them.

I'll let Todd go into details of his trip and the load he took home!:beer2: The 1200 wasn't part of the load home.:bash2:

MAN What a mug shot LMAO!!!!!!!!!!!!

Well when Todd left Duks place he stopped down here and left me, not this is my wifes talking, more of someone elses scrap plile! :LMAO1: See Allen Z and i get togeather a few time a year and exchange scrap piles. Some times you find a dimond in the rough! Anyway Todd left with a diesel that I snatched up from his area last year. Kida a funny story, maybe Ill let Todd tell it, and he left me Dukes 2072. His 2072 sheet metal is in much better shape than mine was. So Ill have just a few weeks to get it ready for RNPD. I hope I can get it ready in time. Todd took Dannys 482 with the command for a quick ride, I think he liked it! Wish I had more time to BS but I was in the midle of a side job and he too was short on time. And no pics here, thats a first as everyone that comes here get a "Mug Shot" taken, LMAO!

Heres a scrap pile find from Allens house down in Atl Ga. I dont think the QL lasted a day and I cut it up!

Per Vince o's recommendations, I was very careful when I unloaded the first QL.

http://i1104.photobucket.com/albums/...036640x450.jpg

Vince you should know that if I've got a camera your going to get your picture taken!

CAD sweet big FEL pics!

The other two came off also!!

http://i1104.photobucket.com/albums/...037640x580.jpg

http://i1104.photobucket.com/albums/...040640x541.jpg

Extra careful with the second QL!!
Thanks for the guidance Vince!!
:biggrin2:

Love them QLs'!! :bigthink:

Great pics, guys!

Here's what we did to the 100 today. :biggrin2:

http://i487.photobucket.com/albums/r..._1686Small.jpg

http://i487.photobucket.com/albums/r..._1681Small.jpg

http://i487.photobucket.com/albums/r..._1691Small.jpg

Cad I hear ya! When I worked at the Cat dealer I was good for draging them out of the woods and putting them on the forks of a Lull and washing them.

No its a size bigger ms311 with 20 in bar! It was almost a farm boss but this one had the newer spring isolated handles and compression release! Its a great saw and never had any problems with but its only 2 yrs old!!

aj,
Lovin the mud picture with the load of wood! That's the ideal set up: a Cub, trailer, and a Stihl saw, hard to beat!
Cadplans,
Nice way to unload tractors, with the high lift!
Allen,
That 100 with the restored push blade looks better each time I see it! I like the black wear plate.
I did get the snow thrower on the 147R today.
Regards,
Chris

Gee Whizzz...can you say BINFORD!!!!! That's quite the Cub Lift you have there!!! :HeeHee::Woo:

Thanks again, Chris! I really appreciate it! :ThumbsUp:

Thanks guys! Love the blackstrip on the blade as well! Very cool lift idea guys and man that red really looks nice everytime i see it!!

I went out and took the tarp off to show the snow god's the plow on the front. and its on there for a reason. middle of Jan. and we are getting first of April weather.

I want to ride.....

http://i846.photobucket.com/albums/a...t/100_6803.jpg

Thanks Adam!

I hear ya! I want some snow in NC, now that my blade is on the 100. :biggrin2:

Got the original out and played with it a little today
Attachment 19676
Attachment 19677

Group Pic.

Great pics everyone!

Allen, that snow blade would look more useful if you didn't have short sleeves on in January wouldn't it? Last year at this time we had 3-4 snows already here in NC. Hope you get to put it to use. I really like the black half . Your tractor looks mean enough to scare the snow off the ground.

Duke, good shots of the FEL action.

It's sure green outside this year!

John

Awesome pics Jed! :beerchug:

Thanks Dan.:beerchug:

Nice pic of the group Jed!:beerchug:

Good looking fleet, Jed!

Thanks John! We definitely had more snow last year.

Thanks John! Todd had some fun playing in the garden!

So true!

I pulled the engine from the 71 to put into my O rear pto project yesterday. I've got to swap oil pans and get the 71 back up and running. Once I thin out the herd I'll start making a roller O!

Got a little work done on Dukes old 2072. Danny took the eng out almost all by him self, I did the wiring and cables, he did the 6 bolts and lifted the eng. The other night while putting the carb on Vinces 582 I noticed a differant tag on the eng for the super. So I looked up the spec number and sure enough its a short block! Im pumped now! I dont think it will be running in time for RNPD but it wont be long after that. Did some horse trading on the bar stock to make the 3 point lift arm for it. Im going to get a new drive shaft for it, big groove in the end where it hit something or could have been the P/O before Duke and I. Cant wait to get it running though!

You are making progress Vince!
Looks good!

Vince, good thing Danny is doing all the work for you he's making great progress!:biggrin2: You lucked out on that short block! You've got lots of time before the plow day so don't start throwing in the towel yet!

I installed the new steering wheel Danny picked out and Vince mailed to me.:biggrin2: Evan is pumped about getting seat time on the 1650 again!:biggrin2:

That's a nice looking 2072 you got:beerchug:

Nice work on the 2072, Vince! Danny is a hard worker. :biggrin2:

Vince,
Nice to see the young guys right in there working on the Cubs too!
Great shots!
Regards,
Chris

Got my lights working today! :biggrin2:

That is a simple and very effective addition. I put one on my 782 for winter duty and love it.

Nice tractor too.

Your 1450 is looking tough, Dan!

I got to move some snow today. we only got a little over 1" . so I went out and played in it for an hour. wasnt worth the gas , but I had fun.