Well, I slid the blade under the QL1000 today!

It looks like it was made to fit under a Cub, the Gravely wheel base must be similar.

I took some dimensions, now I will fab some brackets.:bigthink:

Well I have cut out some brackets.

They will attach to the rear axle like the disc brakes do presently, except further in towards the center.

Attachment 18679

I guess it is time for a moderator to move this thread to the new

" Home Made"

area!!


More to come!!

Those brackets look nice! I will be interested to see how it works out! Please post lots of pictures once its mounted!

Nice job on the brackets! :beerchug:

Well I made a kit of parts, and took a photo.

Attachment 18745

I looked at the photo and decided the formed part I made was inadequate for the blade bracket.

Back to the torch, and a difficult match drill to make the holes align.


Attachment 18746

The part is 1" thick, the three 1" and one 3/4" holes are flame cut.
(It is real tough to cut a hole of smaller diameter than the thickness of the material)

I flame cut the holes as I did not have a .030" clearance size (.780") drill bit.

The "clamping" holes are 3/8" and uses 4 1/2" long bolts.

I am "Tebowing" right now, hoping these parts will fit the QL1000 and the blade!!

Pretty good game so far!!

Looking good!

i perfur the front mount.

Our very first Tebowing post! :Woo:

Nice fab work!!! What's tebowing? Lol

This is so :OffTopic:

http://tebowing.com/