Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   General Talk (https://www.onlycubcadets.net/forum/forumdisplay.php?f=24)
-   -   Mower Deck Paint (https://www.onlycubcadets.net/forum/showthread.php?t=55837)

IHCubCadet147 09-11-2019 10:18 PM

Quote:

Originally Posted by ol'George (Post 487896)
As said by others if the deck is used, it is going to get blasted by debris.
If one has sandy soil or bare spots, nothing is going to hold up.
oh and mulching dry leaves will clean up the underside of a deck like sandblasting it. BTDT:beerchug:

Quote:

Originally Posted by cooperino (Post 487897)
:beerchug: What he said! I usually paint the underside of my deck after my agrifab leaf sucker has sucked its last leaf of the fall.

We’ll see how long it lasts. If it needs, I can put another coat of paint on at the end of the season.
Quote:

Originally Posted by finsruskw (Post 487902)
If its really rotted like you say, sand blasting will more than likely leave you with a sieve

I’m not going to sandblast it, just wire brush the heavy rust off.

IHCubCadet147 09-18-2019 09:23 PM

2 Attachment(s)
After a rust converter and two coats of Rustoleum, it looks much better now. We’ll see how long it holds up.
:popcorn:

cooperino 09-19-2019 06:34 AM

Looks good:ThumbsUp:

Is this mower deck on leaf duty in fall?

finsruskw 09-19-2019 10:36 AM

Looks like a really rough underside surface.
I would not expect that to shed grass clippings that are damp very well.
Good luck!

IHCubCadet147 09-19-2019 10:15 PM

Quote:

Originally Posted by cooperino (Post 488157)
Looks good:ThumbsUp:

Is this mower deck on leaf duty in fall?

Thanks. They only have 1 tree, so there won’t be a lot of leaves.

Quote:

Originally Posted by finsruskw (Post 488164)
Looks like a really rough underside surface.
I would not expect that to shed grass clippings that are damp very well.
Good luck!

It can’t be any worse than before.

IHCubCadet147 09-21-2019 07:43 PM

1 Attachment(s)
I tested it out today. The grass didn’t seem to stick too bad. We’ll see how it holds up over time.


All times are GMT -4. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.