Only Cub Cadets
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Cub Cadet Original Tailshaft Leak (https://www.onlycubcadets.net/forum/showthread.php?t=59268)

That_cub_dude1847 10-12-2021 06:46 PM
Quote:
Originally Posted by ironman (Post 512615)
Yes, you use the tip of the axle like a crowbar.
Stick the splined end in thru the seal about 1/4 inch so that it can grab the inner edge of the seal and push the lugged end off to the side like you are pulling a nail out with a crowbar.
It will pry right out, eezy peezy.
Should I apply any sealant around the oil seal and can i replace it with fluid in the transaxle or no?

darkminion_17 10-12-2021 06:50 PM
I would think you already have the fluid out being you removed the axles. No sealant is used.

drglinski 10-15-2021 08:39 PM
I hope you have a good NAPA that will work with you. Mine would tell me to get lost and wouldn't help me find squat.


All times are GMT -4. The time now is 11:23 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.