same here no pics due to all cards were full will get some of the lil 70 working out soon, tornado's???? heck id pull the 100 in the living room :beer2:

dads70,

The 100 was protected...LOL. It's my pride and joy! Seriously, it didn't get too bad in our area. We just had high winds and heavy rain. :beerchug:

Well the garden is roughed in, had so much fun I might have to make it bigger!

http://i50.photobucket.com/albums/f3...n/101_0301.jpg

And I think I might get less seat time when the "Boss" is on spring break..

http://i50.photobucket.com/albums/f3...n/101_0306.jpg

Had a great day for sure!

Great pics, Jay! :beerchug:

Bill: Great job on getting the cubs ready for Spring! :ThumbsUp:

I finished my sleeve hitch mount grader blade this morning. Graded the driveway with it and it works great. I'll post some pics later.

Can't wait to see your pics, IHinIN! :ThumbsUp:

Got some seat time on the 100 today. Hauled some things for my bride. I'm ready for PD. The 100 will look a little different after next weekend. :beerchug:

http://i487.photobucket.com/albums/r..._0897Small.jpg

Well this is more like a what I've done for the past two days but finished it today. I've learned a lot about plows the past two days! I have so much more to learn got to read up on setting the plow up correctly but I got the job done. It didn't help I'm missing some of the adjustment parts :Duh:. I still need to mount the mule drive and tiller and give that a go but I just wanted to plow!

IHinIN :WWP:

ACecil 100 and the trailer looking good as usual :biggrin2.gif:

Methos Looks like you have been busy :ThumbsUp:

I welded the wheel bracket back on my 44A deck and got two new belts, and installed it back on the 1200. Charged up the batteries and mowed half an acre. Even tho I can see thru the deck, with new belts it did a nice job.

I checked all the belts when I was done, they looked like new. Far cry from when we had the 126 deck on there... (The center pulley lines up in a different place with the NF deck on the Quietline, and it throws the belt quite often..)

Got all the tires pumped up on the 126 and its parts machine (107 ) and hit everything with a good dose of PB blaster... Gotta get going on the cub rebuild project this week..

Oh and I got an old bike going that I picked up in a yard sale.But even tho its built like a tank, it isn't a CC.

Nice pics, Duke! Load up your 122 and plow, and come to PD in Pickens, SC this weekend. It's going to be a blast! :beerchug:

Thanks Allen! Not to sure what days I'll have to work. I have a 3 day weekend this weekend. There's a tractor show in Turnserburg next weekend too. My plow is no where close to being set up right but was able to power right thru my problems. I would reather spend another day plowing that's for sure! If I have to work I will hit the tractor show in the morning then go into work 2 4pm now if I'm off I trip just might be in store! I'm sure there will be several folks that will be able to help me get this plow set up correctly. Got to start looking for those adjustment parts just in case.

I wish there was a plowing guide like the tiller guide we have here on the site.

I'll keep you posted on what happens with work. The weekend of the 16-17th going to be in Ohio going cub hunting hoping to bag a creeper for the tiller.

I had a very productive Cub weekend. We started with Dustin's 149. We removed the front spindle bolts and thoroughly cleaned and greased the assemblies. We also checked the trans oil,and got the mower deck installed. We moved to my MIL's 1450 and did the same front suspension work as well as replaced the hydro fan,the air cleaner gasket and did the deck blades after we had them sharpened.Then,I moved on to my 1200.Removed the wheel weights and started priming/painting them to look nice. Did the spindle removal/grease deal as well as greased the front axle and the steering box. Installed my mower deck blades and checked the air in the tires on all 3 tractors.Still have to do the same to Dustin's 108 as well as install a clutch assembly in it. Getting them ready for the plow days in Danville and hoping to hook my 1200 to the pulling sled.It helped that we did most of the maintenance last fall,as now they are ready for mowing duty now...My last endeavor was to get the (free) power washer running. I got it running after 5 pulls. Need to get some corrosion out of the water pump,but it's a Sears unit,so parts should be available...

I had the 982 and Toygirl had the 1862 with the trailer on the back. She cleaned up the remnants from winter and winds, and I got dog duty (pun intended):bigthink: We ran around the yard for a few hours and got it nice and clean for spring. Both tractors got their spring maintenance a week or so ago, and I found that the plug gap for the 1862 in the cub manual is different than in the Kohler manual (.025 & .035 respectively). It always took a few turns to start (at .025) and I regapped the plugs to .035 and now she fires in about a 1/2 of a turn.:beerchug: Having an issue with the thottle cable/governor on the 982's Onan. I hope to have it worked out tonite.

Worked out the issue with the 982 at lunch time. The throttle cable was slipping thru the stay (no clamp) on the throttle lever. I re-adjusted the cable and clamped the stay (large pliers) a little tighter and she seems to be good as new. I got out my engine analyzer and am going to check the hi & low rpms and adjust the governor to spec. I thought I broke something important and am relieved I did not. Not too impressed with the way that cable attaches to the lever.

got the motor, hydro lift, lights, sping assist and rear lift out of the 122. now just need to figure out how to get that dang creeper out of there

Here's some pics of the grader blade I built. Now it just needs a few coats of Cub white paint. I think I'm gonna make some removeable side plates so I can use it as a box blade too.

IHinIN
That is a nice blade :ThumbsUp:

Your blade looks awesome, IHinIN! :ThumbsUp:

Thanks guys.

well, me and cubby were saw'in up a bundle of slab wood the other day.

Great pic, John! It always fun having a cub to work with. :beerchug:

Been busy
 

Been busy working on the new Cub Hospital , got it done Friday . Sunday mounted up 6 ags and 2 tri ribs . Raining out today so I pushed in the 70 iI picked up last mounth to get it running , had a blown head gasket . fixed that good spark but would not start . pulled of the carb cleand it and it started right up . put 4 new ags and 2 new tri ribs on it .
new Cub Hospital
http://i227.photobucket.com/albums/d.../462010002.jpg

and the 70
http://i227.photobucket.com/albums/d.../462010003.jpg

The cub hospital and your 70 look awesome, camarokid! :ThumbsUp:

I put another wire harness on the 124 today and then mowed with it for an hour or so.
My little dog must have thought that it looked like fun. She jumped up on the seat and looked at me as if to say "Hey Dad...can we go for a ride?"
http://i269.photobucket.com/albums/j...ad/Cub_Dog.jpg

camarokidz28
Great looking 70 :ThumbsUp:


CBH
124 Is looking good :biggrin2.gif:

Nice 124, CBH! My little buddy doesn't like to ride.

camaro nice 70. wish i had a nice set of ags and tri ribs for my 100.

sweet looking 70 camarokid.:beerchug:I'm going to play with putting the duals on my 1650 this weekend.

Raining again....
 

Turning the dirt,er mud....

Great plowing pics! I'll be doing that this weekend! :IH Trusted Hand:

Great muddy plowing pics! Hope you had fun cleaning up after that.

Good pics......but it looks like it may have been just a little too wet to be plowing! :biggrin2.gif:

Well I was able to install the new gauge wheels and front deck roller today. Almost ready to mow I just need the belt and change the oil and Hytrans.

Thanks for the compliments guys..... It was definitely to wet, but i had to get the ball rolling.... I surely made another mudhole while washing it...lol....

put the 3pt on the 1650
 

put the 3pt hitch on my 1650 so i can do some tilling just threw the boxblade on there for fun. tillers goin on this weekend

Looks good!


You going to take that to the PD in Montrose this year?

Nice 1650 and box blade, Nick! :beerchug:

Jaybrd yes I do plan on taking it. I plan on plowing mainly with my 169 and a little with my 100 and my dad will use this 1650

Methos, there is a plowing guide on the site.. well, kinda. here is the link:
http://onlycubcadets.net/forum/showthread.php?t=420