Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   Road trip! AKA 2182 # 2 (https://www.onlycubcadets.net/forum/showthread.php?t=35311)

mickb72 10-22-2014 07:06 AM

cub
 
Nice machine Sam. Which direction was the road trip? Hum, 240 miles, could have been around many of us. Mike:biggrin2:

Sam Mac 10-22-2014 07:20 AM

It was in Seven Springs NC. Not too far from Allen C. Wish I had more time I would have made a visit to see him.

Sam Mac 10-22-2014 07:25 AM

Quote:

Originally Posted by Calvins66Cub (Post 292442)
Sam, nice find. I like your winch setup! Could I see a few more pictures of it, and how you wired it? Mounting? Wire routing?

Not much to see, just got a piece of 3/8" plate, drilled it for the bolt holes on the winch and welded it to the top rail of the trailer. Bolted the control box on the underside of the top rail and plopped a plastic battery box on the deck and strapped it to the corner post. Wires are just sitting on the deck at the moment. I was in a rush to get it useable. Needs to be finished.

jimbob200521 10-22-2014 08:19 AM

Congrats on the machine, Sam! It looks like it's in good shape, especially that deck. Hope it finds a good home, but wherever it ends up, I'm sure it'll be in much better shape by then. Look forward to the progress pics! :beerchug:

Berwil 10-22-2014 09:35 AM

Nice pick up Sam!

Sam Mac 10-22-2014 09:49 AM

Quote:

Originally Posted by jimbob200521 (Post 292455)
Congrats on the machine, Sam! It looks like it's in good shape, especially that deck. Hope it finds a good home, but wherever it ends up, I'm sure it'll be in much better shape by then. Look forward to the progress pics! :beerchug:

Ryan

The deck looks a lot better in pics than up close. It has a couple of rot holes and one of the front wheels is in pretty bad condition but I'm sure I can come up with some way to save it.

Sam Mac 10-22-2014 12:17 PM

Got it running, wiring is a mess, shut down solenoid on the carb is stuck. I just happened to have a carb for a WG-600 so I swapped them, hooked up my patented Sam Mac fuel tank and she lit right off. Went to take some pics and the battery in my camera is dead. It's being charged at the moment so pics to follow. :beerchug:

J-Mech 10-22-2014 12:19 PM

Hey congrats on the find Sam! Glad you got it running! :ThumbsUp:

Busy day here, looking forward to the pics!

jimbob200521 10-22-2014 12:41 PM

Good on ya getting it running, gotta love it when it's an easy fix. Don't you know to have an extra charged battery for your camera at all times yet?! :biggrin2: Keep the pics coming!

Sam Mac 10-22-2014 03:09 PM

5 Attachment(s)
First 2 pics are the "Sam Mac fuel system" as some of you know the 2182 and the diesels use an electric primary fuel pump. Well on this tractor the tank bushings are totally rotted off so no way to use the tractor fuel system until the fender pan is pulled, tank removed and the issue is fixed. The pump sprayer supplies fuel to the carb. Actually works very well. The other pics are of the patient on the operating table.


All times are GMT -4. The time now is 08:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.