Only Cub Cadets - Another new addition to the family..

Page 3 of 8

Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)

- - Another new addition to the family.. (https://www.onlycubcadets.net/forum/showthread.php?t=50118)

J-Mech

10-01-2017 08:58 PM

Quote:

Originally Posted by sorner (Post 434160)

the one axle carrier is shot. Both holes in the top are shattered and one has a broken off bolt flush in the hole, and its missing the tab on the left side.

What is an axle carrier?
Both holes in the top of what?
What "tab"?

I'm lost...... :bigthink:

darkminion_17

10-01-2017 08:59 PM

Quote:

Originally Posted by J-Mech (Post 434249)

With a pair of these..... A tool made just for removing that style of snap ring.
Attachment 87813

What he showed.
That is what I use.

john hall

10-01-2017 09:00 PM

Take a look here. Jmech beat me to the post, took me forever to find them on the net, everything points you towards "ordinary" snap ring pliers.
http://www.ebay.com/itm/Wilde-Tool-9...AAAOSwdsFUNCKI

sorner

10-01-2017 09:04 PM

Quote:

Originally Posted by J-Mech (Post 434251)

What is an axle carrier?
Both holes in the top of what?
What "tab"?

I'm lost...... :bigthink:

The two bolt holes through the axle tube into the frame are split out and the front mount to the frame. All three mounts for the transmission to the frame are broken out and one frame bolt is broken off into the main housing. There’s no salvaging this one. The common failure of these when they aren’t braced. Make sense?

sorner

10-01-2017 09:05 PM

Quote:

Originally Posted by john hall (Post 434253)

Take a look here. Jmech beat me to the post, took me forever to find them on the net, everything points you towards "ordinary" snap ring pliers.
http://www.ebay.com/itm/Wilde-Tool-9...AAAOSwdsFUNCKI

Right angle lock ring pliers. Got it. Thanks John and all.

darkminion_17

10-01-2017 09:09 PM

I think mine are left angle ones...

sorner

10-01-2017 09:10 PM

I could just hold them in my left hand to make them left angle. :biggrin2:

john hall

10-01-2017 09:11 PM

Quote:

Originally Posted by darkminion_17 (Post 434258)

I think mine are left angle ones...

You probably own a metric adjustable wrench too!:biggrin2:

darkminion_17

10-01-2017 09:15 PM

That and a pair of metric pliers.

J-Mech

10-01-2017 09:16 PM

Quote:

Originally Posted by sorner (Post 434250)

What’s it called? I went to autozone and they said I could probably get it with bigger snap ring pliers. I have my doubts. I got them but haven’t tried it yet. I figured there was something like that but didn’t know what it’s called.

Snap ring pliers. Autozone can't get them. You have to get them from a real tool suppler. Napa may be able to get a set, but I doubt it. I have no idea really.... I don't buy hand mechanic tools from anyone but Snap-On. You can buy a set like mine. They are $53.50 (plus shipping I'm sure).

https://store.snapon.com/Snap-Ring-P...g-P647705.aspx

All times are GMT -4. The time now is 04:25 AM.

Page 3 of 8

Show 40 post(s) from this thread on one page