Looks good Jude, I love that rear blade on the "O". :beerchug:

What are you talking about?? We only talked for 3.5 hours total today:ROTF1: Ya, I like those ag's! They may end up on the 124 when she goes up for sale. Thanks bud!!

Thanks Eric, will see how she works tomorrow. Supposed to be 50 degrees here!!

Cool can't wait to hear how it works. I'm going to find one of those someday. It was 63 here today, but the cold is coming back over the weekend:angry:.

Only 3.5 hrs dang it felt longer then that! I haven't been braven enough to look at how long I was on the phone today or past two days. It's been a ton of time for sure.

Oh yeah!!! I Love that rear blade. I want one, :).

I took advantage of the nice weather and cleaned up the haban and repainted it.

aagitch
Nice work on the blade :ThumbsUp:

Your blade looks awesome, Adrian! :beerchug:

Dang that does look nice!

aag . ..

Ohh, that looks real nice!

Sitting there in your block-shop, it looks like a gladiator ready to enter the arena!

Adrian, very nice looking tractor and blade:beerchug:

I spent a couple hours last night trying to get a broken off piece of key out of the 124's ignition switch. Got close a couple times but had to give up on it as I was getting tired. Gave it another shot tonight and took me 1/2 hour to get it out:buttrock::clap:

Started getting the 42" mower deck straightened out - overall it's in good shape, just a few wows, warts and warps in the leading edges. They all came out pretty quickly with some cold hammering on the anvil. There's some moderate pitting on the under side but nothing serious and the only crack in it welded up nicely.

hilltop
Nice work on the Deck :ThumbsUp:

About time you got that thing out!:beer2:

Looking good!

Dang Jude, I have an ignition from an "O" here that I have about 8 hours into trying to get a broken key out of. Maybe I should send it up north and let you take a crack at it, hehehe.

Adrian, That's is one great looking blade and tractor.

Hilltop, Deck looks great keep up the good work.

Hilltop, great job on your deck! :ThumbsUp:

Thanks guys!

I've got goodies coming in from Mark @ IHCC Parts and I'll have to dust off the 'ol paint gun to shoot the deck - I can't wait to get it completed and blades turning under it again!

Good to see you got that thing out,my 123s got a crack in the key,im glad my brother has a key cutter,made me one real quick:biggrin2:

The decks looking good,looks like you have a nice blacksmith shop too:ThumbsUp:

worked a little on the 122 today. before, it had Tru-Powers on it that came off a John Deere.....and Lazy me didn't wanna change rims out. so i painted the deere rims cub cadet white and slapped them on. only problem was, the rim wasn't an offset rim, so the tire would rub on the fenders. so the fenders came off. well, i got my hands on a tire changer from my mechanic and we changed the tires over to my cub cadet rims. they are narrower rims so it narrowed the tires in too which is cool. now the fenders are back on, grote light is back on and wheel weights installed. looks awesome. i got the tiller working as well. just put it all together and she works awesome! also topped off the hydraulic fluid in the Hydraulic lift and it works allot faster now. can't wait till spring!

got out the 102 today. she had a flat front tire. got that fixed. went to go start snow blowing the end of the driveway and the auger sprocket blew apart....so thats sitting in the shop waiting until i can get a replacement.

thats my cub day!

Nice work hilltop!! I love where you live, even though you got screwed on the snow this winter.

Eric, send it on up and I'll do my best to get it out for ya:biggrin2:. PM me if you want my address. It was tedious and took some patience. Saved myself $35, now just need to get a couple new keys as the other one that came with 124 is cracked.

No pics??? Wanna see those tru powers.:beer2:

:WWP:

Some patience? That's a under statement!

The last couple of days I've split Allen's 122 took the hydro lift and creeper off switched rock shafts from the 125 and 122. Rebuilt the clutch on the 122. I wonder if Allen will notice that stainless steel drive shaft in there.:HeadScratch: Friday and Saturday I struggled until I turned the radio on and things went a lot better for me and Allen's 122 after that.:beer2:

I also made reports to Allen to keep him updated on the progress. I took pics but Allen has them now.:biggrin2: Got to keep the boss happy!

Those stainless steel drive shafts are sweet aren't they? :biggrin2:

Ya, would love to see some pics of those Ag's!!

Not an understatement if Eric's got 8 hours in on an O' ignition:beer2:
WOW Duke:bigeyes:. Sounds like you did something this weekend:biggrin2:

A pic of my key removal tools!

Well Jude after your success with your key I went at mine again tonight for another hour. NO LUCK :angry:. On a lighter note, I did get the replacement hood for the 1282 striped and fixed a couple dents. Still have some sanding to do but almost done. :biggrin2:

Sounds like you had a good weekend Duke!! :beerchug:

I really appreciate, all you done for me, Duke! :High5: :Salute:

here are some pics of my machines! the cub cadet 102 has the snow thrower and the cab. the next is a pic of the 122 with the tru-powers and the new 1a tiller i picked up for it. next, is my snow pusher. also through in some pics of the lights on the 102 and the accident we had with our other lawn mower.

http://i117.photobucket.com/albums/o...0220012309.jpg
http://i117.photobucket.com/albums/o...0220012310.jpg
http://i117.photobucket.com/albums/o...0012310a-1.jpg
http://i117.photobucket.com/albums/o...220012310b.jpg
http://i117.photobucket.com/albums/o...0220012311.jpg
http://i117.photobucket.com/albums/o...220012311a.jpg
The lawn mower accident. tried to climb a hill and it flipped over backwards....as you can see...shes pretty well shot. still runs and drives tho. i was driving it today.
http://i117.photobucket.com/albums/o...0216012224.jpg
http://i117.photobucket.com/albums/o...216012221a.jpg

Cool pics of the cubs, Nick! :beerchug:

Haha!

Was all good here!

Your welcome Allen! Still got some fine tuning to do but getting closer to being done.

Nice Nick! I still dig that cab. I hope no one got hurt on that roll over. That's pretty scary stuff.

woke up to 3 inches of snow. so i started up the 1450 and blew most of it then i cleaned up with the 128 and blade. i'm really starting to love the 128. then i pulled the 1650 into the shop and took the motor out so i can replace the connecting rod and the motor mounts. kinda boring but a busy cub day :beer2:

what did i do with my cub today,
 

my son came around and plowed out my drive, and neighbors, and
now clutch petal wont engage to put in or out of gear.

How's my plowing, guys...LOL? Hope y'all enjoy the pics!

Hey Duke, how's that for working the 100...LMAO? :IH Trusted Hand:

http://i487.photobucket.com/albums/r..._1187Small.jpg

http://i487.photobucket.com/albums/r..._1188Small.jpg

Not good enough Allen at least hook your plow up before you take the pics.:biggrin2: Good thought tho! No better way to spend a 75F day then on a cub!

Dang!! It's whole 3F here today, -16 with wind chill:bigeyes:. Can't wait for spring, shoot, can't wait for 50F weather!! LOL Allen, your silly:beer2:

Put a new battery in the 3235 today. Starts like a champ now, and the lights actually work! LOL!!! Just in time for the next snowstorm to come through.

ACecil
Looks like you ran the disc over it too :biggrin2:
Great picture of you and the 100.

Pa Cooner
You may need it by morning.. Its a ice storm here right now. Heading your way.

Allen - You did ALL that w/o an umbrella or beer holder? . . . you're my hero!

Nick, glad you didn't get tangled up in that roll over!

Thanks guys! Seriously, I'd love to be able to get that field for a plow day. :ThumbsUp:

It's easy you say when it is and we'll show up and Jenn warns us when the cops come!:biggrin2:

Today i had to re-thread the hole for my exhaust - started tearing down the engine to get it ready for a bath tomorrow to get all the oil and grease off it - and finally make sure i have the right tools too measure the bore (hope and pray nothing will be wrong)!!!