100 Resto
 

Heres some pics of my next project i started. It was my main worker until i aquired the 1200 and took the 12 out of the 100 and put it in that, but i have a 1000 that the motor is going to go in this. It'l be my 2nd plow tractor so my dad has something to run if he comes with. Geting a special axle up front, and some different fenders and maybe rops. Also included is some pics of the forklift i made for my 3pt in action. Going to get a hydraulic top link. More pics to come! :biggrin2:

Great pics! Looking forward to your progress on the 100.

X2

and that back fork is slick:beerchug:

X3 and I love the back forks too!

I agree, nice work jlampe94 :ThumbsUp:

Sweet pics and I like the forks too!!! Whats the limits of the rear lift before ya start breaking things ya think?

Lookn forward to the 100 resto, but Ive got to see more pics of the fork tractor too.:bigthink:

Wow, love the forks as well! I second, third, fourth, and fifth the request for more pics of the forks.

Look forward to the progress on the 100. I have enjoyed following the 1200 build. :beer2:

Another interesting post....great pictures!
:ThumbsUp:

Thanks guys, and ill get some more pics of the forks (have a sprayer strapped to them right now) Theyve found there uses very quick. Ill have more on the 100 later thinking on painting it red since i have a bunch of it already from my W-4, not sure yet tho.

So far i havnt bent or broken anything on it, pry had 300lbs+ on it, picks the front end off the ground before anything happens. Ive tried to break something (jumping up and down standing on a corner of it) but it seems good:beerchug:

Update on the 100 , got the motor tore out of the 100 PO was nice to me and left all teh engine mounting bolts out so i only had to unhook wires.ha Engines tore down just needs a std piston and rings and gaskets. Valves were like new measures almost new little bigger but under max wear. Hopefully itll be warmer tomarrow so i can get some paint wired off the frame, tower and everything that doesnt fit in my blaster. Monday going to get the front end built hopefully.

looking good

Well cold out again today so no paint removal but.......we got fenders made for it! they started the day as a piece of sheet. also started to look at heigth of the front end. Still have to put some end plates in the also going to stick some LED lights in em:biggrin2:

Looks awesome! Appreciate the update.

Looks like a conversion is under way! What model are you shooting for?

Thanks guys, Methos- just keeping it a 100 but with a narrow front and the square fenders looked more like they belong than the round ones, plus now the round ones can go on my other 100.ha I thought about a conversion but havnt really seen anyone do this to a 100 and try to keep a stock look.

Sort of has that 806 farmall look to it. Might be neat never seen an 806 cub. Just a thought. Great job on the fenders, might try that myself someday.

Nice job with the fenders - a couple headlights nested in them would complete the 806 look. Seeing all of these narrow fronts is getting me thinking!

Believe it or not i was really thinking about making an 806.ha Didnt have the metal for it though and trying to keep this at a budget so im stickin with the 100. Also time is an issue like always gotta get it done before summer because then i go to workin every day. That would be a sharp model done up though.:beerchug:

cub cadet 100
 

methos could you please help us with our rebuilt kohler k241 engine we are installing it but how do you press the three prong things into the clutch disk with the three holes thanks:beerchug::beerchug:

Got the frame cleaned up almost have all the parts for the front end hopefully get it done tomarrow. Aimin to have it primed friday. Hoping to have it ready for a show the 19th. Its going fairly smooth so far:beerchug:

Everything you'll need will be in here. Let me know if you have any more questions.

http://www.onlycubcadets.net/forum/s...ead.php?t=4640

Looking smooth too!:beerchug:

Looking good! Thanks for the update.

Looks great. I've got the frame and the tranny on the 73 to get cleaned up and primed also. Kinda been dreading it, LOL.

We got a roller! Got the front axle made today, steering hooked up grease zerts in, seems to work good. Got the insides of where things bolt on primed so i can prime over it all at once. Parts for the engine came in i think thats what tomarrows going to be is getting that cleaned up and put together. So far ahead of scedule:beerchug: Also a pic of the exhaust on the 1200, just the stock muffler flipped with a another one used as the stack nothing special.

Looking good! Thanks for the pics.

Got her primed today, along with some other pieces. Hopefully have the motor in sunday evening, wet sanded monday and top coated monday. Wiring halfway through the week and running late week. Getting some ags for the rear that were on a 1250 i sold to my uncle a few years back but trading him some turfs and labor for them. Going along nice still (knock on wood). Need to do a lil putty work on the fenders, and thats teh boom we made for out sprayer in the background.

Looking good!:beerchug:

Very nice! Thanks for the pics.

I'm with them! Keep up the good work!

Well got my tires back from my uncle for some labor:biggrin2: Really make it look alot better, sets a little more level also. Hoping to paint it tuesday, have motor done tomarrow. Picked up another 6inch plow tonight, anyone know what brand? This one and my other one might turn into a 2 bottome some day :bigthink: Thatll be a different thread Also traded labor for a Duetz Allis 1920 i think its the model. Needs a rebuild but runs, hydro drive with lo and high range, hydraulic lift, power steering, differential lock, electric fuel guage, pto :BlahBlah:

Great pics, it's coming along nicely!

looking good. you should make it look 806 with all the sheet metal

She's YELLOW!

Very nice! Cant wait to see it all finished!

I agree with Dan!

I agree with Dan and Allen!

I agree with all of you!:beerchug: