Footrest Pad Question
 

I need the footrest pads for my 1872. Will the metal ones from earlier Cub Cadets such as the 1X9 and QL's fit? Just want to know, before I buy a set. I'd much rather have the metal ones. :beerchug:

Ya need extensions on them too Allen? :biggrin2:

allen. aaron at xtreme motorworks has some fancy ones for 82 series.

yes they will bolt right on.

They will bolt on if you drill one additional hole.

Thanks guys!

Or just use the three bolt holes that line up. :beerchug:

All of my x82 tractors have metal pads. On the manual lift ones you have to grind a little off for the lift handle. I really like them over the vinyl. I keep several sets around just for that.

Well, it'd be best to still be able to bolt the fenders to all original attachment points, hence the reason to drill the additional hole.

Allen Im glad you asked this question. I need to do the same thing on the 2072. I was wondering about having mine Line-X'ed. Nice black color and permanent non skid.

Allen


Ya got to get some "Aluminium" cause it's shiny ! :biggrin2:

Cool looking Sam. Bet you could do the Boot scootin Boogy on them.

They look great, Sam!

100R could use those

I cut out a set for a friend out of aluminum tread plate, look great and easy to do.:beerchug:

Thanks again, guys! I found a set. :ThumbsUp:

I got my footrest pads. I need a recommendation on the correct size, bolts or screws to attach the pad to the fender. Thanks guys! :ThumbsUp:

Allen

Pretty sure I used 5/16 X 1" on my pads with ny-lock nuts and some never seize.

Thanks Sam!

wont 1 bolt need to be a little longer to go threw the round bar? or maybe your isnt the same as my 582

Could be, I'm old and have a bad case of CRS :biggrin2: Seriously it's been about 5 years since I did the Aluminum pads on the 1210. I'll try and remember to check it out but no promises, the CRS could kick in.