|
Project 1650 Progression
just picked up a 75 1650 for basically free.......got her all cleaned up and got her running. Moves forward and back, PTO works...need to do ISO mounts and cooling fan. Trunion and rag joints look sweet.......issue i have is the lift lever moves foward and back, but nothing happens.....searched here and in the manual i don't know where/what to look for...troubleshooting tips?
pics for you guys.. http://i154.photobucket.com/albums/s...psc1add578.jpg http://i154.photobucket.com/albums/s...ps96d6f263.jpg http://i154.photobucket.com/albums/s...ps336b4b62.jpg http://i154.photobucket.com/albums/s...ps593584e8.jpg |
Nice pick up. Even nicer when its free!
|
What lift? Deck or sleeve?
|
Nice looking 1650! Congrats. You did well especially if ya got it for free. Rear lift and all. :beerchug:
Pull the tunnel cover off and run the lift to see if the cylinder is moving. Probably sheared off the pin going into the rockshaft. If the cylinder doesn't move, then we'll have to dig deeper. |
First off I'm jealous you got that for free.
I just finished fixing the hydro lift handle on my 1450. The brass handle broke under the dash where it attaches to a bracket, then linkage to hydro pump. not easy to get to but I replaced it by getting a new brass handle drilled a small hole and reused the old parts from there. I removed the gas tank to get to it. First used pliers or channel locks and moved the hydro in and out at the pump itself. if the hydro moves then you know the problem is handle/linkage related. you need to look and see if the arm is broke or if you are lucky just not attached to the bracket for some reason. since the arm is not swinging freely it probably is not broken but hard to tell without seeing it. a good look under the dash will help. goodluck- |
will do fellas,,thanks for the leads.....does the single handle lift the deck and rear sleeve?...meaning are both connected at the same time and both will move?...or is one connected, and then have to disconnect and reattach the other?
im sure you guys wont remember, but in 2011 i got a 79 1650 for free also. turned out it had broken rings, and a bad hydro..(got parted out/scrapped)so this is my second 1650..1st one was abandoned by my buddy behind his workshop..this one was from a coworkers dad. He died, coworker wanted to get rid of everything. She told me to just take it, but i gave her scrap price minus fuel because it had sat for 6 years and condition was unknown....thankful it started up so easily...a mouse nest flew out the flywheel hole and a rotten mouse went past me head by inces..:bouncy::bouncy: |
Saw this on the early cj 5 site. One lever does both.
|
owe ya'll one:beerchug:
pulled the firewall off, forgot about the ram on the column....wouldnt budge..2 shots of kroil, and a little plier jiggle, she moved.....put back together, and it up and down:beer2::beer2: here it is all washed up..(covers and hydro cover not in place due to needed repairs) http://i154.photobucket.com/albums/s...psef69fcad.jpg http://i154.photobucket.com/albums/s...ps737bcf33.jpg i swapped out the tires with ones i had..i really want to paint it ih red..but this thing is in such great shape....not sure any place sell tailight covers...havent been able to find one.. |
Congrats on the sweet 1650!:beerchug:
|
Nice score free is for me.
|
Nice 1650! You did well!
|
Wow! Super nice looking 1650. I wouldn't paint that at all. You just don't find them in that shape everyday. I know where you can find a new lens for the tail light. PM sent.
|
I wouldn't paint it either. She cleaned up nicely. Those tail light lenses can be hard to find. They do come up for sale every once in awhile, though.
|
Look's like it's in really nice shape and was taken care of ! You got you're self a super deal there! Best of luck with it!!!
|
wanted to change the title of the thread since i will use it to show my progress...but cant..
painted my sears wheel weights today http://i154.photobucket.com/albums/s...ps3631172b.jpg almost done fabbing up the hitch stuff.. http://i154.photobucket.com/albums/s...ps9e0642a3.jpg |
Nice job!:beerchug:
|
Quote:
|
Great job!
|
Quote:
What do you want the thread name changed to? I can help with that.:beerchug: |
something simple like 1650 clean-up
|
2 Attachment(s)
Looks good, Here is my 1250 before and after i painted it red. Looks to be a really clean 1650.
|
nice looking 1650, wish mine looked that good.
|
Liking the progress you are making!
|
more little progress on the cleanup...
did a spraybomb job on the wheels and weights..repainted the grill...also had an old ih toolbox that I previously painted red and black....since this tractor as staying cub colors...I repainted it....will put some tools in it..also added a metal pan seat I had around...I know they are less comfortable, but I like metal seats on tractors... http://i154.photobucket.com/albums/s...psbf005fc5.png http://i154.photobucket.com/albums/s...psec18a4c0.jpg also added some $5 a piece LED taillights... |
forgot, haven't messed with the sleeve htch..wanted to do fun stuff this afternoon...and the air cleaner cover is twisted as mouse nest bits are still popping out every now and then
|
Looking good!
|
nice 1650! I like the ags and weights. What it that implement called?
|
The 1650 looks nice!
|
Quote:
That turned out great! Love the tool box! |
dude a free 1650? Thats awesome and I think the 1650 is the coolest cub Ih ever made. :beerchug:
|
worked on the lift...you guys were right..added another brace and put a bolt in it..up and down she goes..she plows too:beerchug:
http://i154.photobucket.com/albums/s...ps96c7a2a0.jpg I slapped on the side covers but still need to clean them..i also unscrewed the footrest plates and sprayed them..EVERY SINGLE SCREW came out easily..awesome!!!! only thing on the to-do list is mount a horn I have in front of the tank shield under the hood..(its from a scout) |
Great pic! Glad you got it fixed!
|
Quote:
|
Looking better all the time. I'm actually beginning to like the seat!
|
my kids been driving it quite a bit...thankfully he doesn't really need to hit the brakes...
the other day... http://i154.photobucket.com/albums/s...pscb1ccb22.jpg washing our rides today... http://i154.photobucket.com/albums/s...ps230664dc.jpg 'Merica:biggrin2: http://i154.photobucket.com/albums/s...ps72d5307b.jpg |
Great pics! Thanks for sharing them.
|
Very nice 1650 and cool flat fender you got there. I really like that tool box. Good work.
|
Very nice pics!:beerchug:
|
Nice pic's! Just love that last one! :biggrin2:
|
Awesome pics!:beer2:
|
| All times are GMT -4. The time now is 12:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.