Cub Cadet 169 compatibility
 

What is compatible with a 169...16 hp kohler..chasis..looking to get my 169 in shape

What are wanting to know?
what equipment?? :Huh:

Welcome. :beer2: The 169 is part of the 1x8 and 1x9 wide frame family but also shares some components with narrow frame Cubs and also quiet lines. What exactly do you need?

Edit: curious George beat me, anyway, what we said

need to figure how to remove tweezers from shroud around engine. . cleaning out mouse nest lost tweezers...lol wanted to practice on another engine before I really do something stupid.also looking for gas tank.

Try a magnet on the end of a stick.

Try some Cheese on a mouse trap :biggrin2:
or do it properly and remove the engine, then the shroud, and remove Mickey's home.
While apart check everything for things that might need attention.:beerchug:

Why didn't I think of that.. thanks. will try tomorrow:beerchug:

gonna try magnet first..lol

Tweezers? :bigthink:

I usually start the engine for a moment with the top and side tins on the engine removed. The fins on the flywheel act like a tornado in the hills!! Stop engine after just a moment and remove any larger pieces that still remain.

Cub Cadet 123

is that pieces of tweezers or nest. .lol. still trying how to get in there somehow.

Take the engine out and remove the tins. Doesn't take long to get it out. Could have had it out by now....

What ^^^ said.:beerchug:

Otherwise if you decide to do it tornadoes way please be sure to take a video.

I second that. It will give a good opportunity to clean up the whole Flywheel Fan area, to ensure good air flow, to keep the engine cool. Check the "fin" area to make sure that is clean also.

:IH Trusted Hand:

Take the engine out and remove the tins. Doesn't take long to get it out. Could have had it out by now....
__________________
Jonathan

Jonathan...you are a fuckin idiot!!!!!!!!!!!!! I am asking for help and u act like I am whining !!!!!!!!!!!!!FUCK YOU AND YOUR COMMENT!!!!!!!!!!!!!!! TO EVERYONE ELSE THANKS FOR THE HELP. GUYS LIKE U THINK UR SHIT DON'T STINK....HAVE A NICE DAY !!!!!!!!!!! ASSHOLE

I've seen Jon get people fired up before but you really take the cake. His comment wasn't even that bad as far as his comments go. If that's all it took to get you going you must be pretty sensitive. Also, language like that doesn't really fly around here.

passionate..........tractor was grand ma's from new. looking for help....Not much of a mechanic...Glad he fires up people...I have not been here since 2013...Now I remember why...

Ok. Well for grandma's sake you should pull the engine out and remove the tins so you can clean the fins out really well. That 16hp block will be expensive to replace if it gets ran hot and smokes the bore. I have a 16 here that had plugged fins and the bore got wore so bad from running hot that the block is junk. Where in PA are you located?

near harrisburg

would not know where to begin to pull engine..

Then you need to download the manual. What Jon said was absolutely correct. Guess it's time to nut up or shut up.

Here's where you can find the manual. I know it might seem intimidating but it's a pretty simple process, the manual covers removal and installation.

http://onlycubcadets.net/forum/showthread.php?t=4644

We Mr. Deernutz I have had enough of your nasty attitude.