Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   782D PTO question (https://www.onlycubcadets.net/forum/showthread.php?t=17097)

billh1963 04-10-2012 11:19 PM

782D PTO question
 
When I bought my 782D, the PTO would only engage when the PTO switch was held in the up position. I assumed a bad switch so I just replaced it....and it's still doing the same thing. Thoughts?

maddog784 04-10-2012 11:27 PM

There's a relay on the left side of the dash tower that works with the safety interlocks - might want to check that out. Mine did the same thing when I first got it, and a wise man told me to start with the relay.:beerchug: He was right!

billh1963 04-11-2012 09:15 AM

Quote:

Originally Posted by maddog784 (Post 126237)
There's a relay on the left side of the dash tower that works with the safety interlocks - might want to check that out. Mine did the same thing when I first got it, and a wise man told me to start with the relay.:beerchug: He was right!

Thank you...will check it out!

wally67 04-11-2012 11:37 AM

I had one that did the same thing I had also bought a new switch and relay that didnt fix the problem. The neutral safety micro switch for the hydro control under the dash was bad causing the issue.

billh1963 04-11-2012 11:41 AM

Quote:

Originally Posted by wally67 (Post 126299)
I had one that did the same thing I had also bought a new switch and relay that didnt fix the problem. The neutral safety micro switch for the hydro control under the dash was bad causing the issue.

I downloaded the wiring diagram...I plan on chasing wires this weekend! :Boohoo:


All times are GMT -4. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.