Hydro engagement
 

I picked up a 125, the brakes didn't work that great, and the hydro is engaging when turning key. I adjusted the brake, the hydro lever goes to neutral when I step on pedal and breaks engage properly. But the rear, or hydro is engaging, I can hear it and it lugs the s/g when trying to start. The tractor does not move, but it definitely needs adjustment, when running it drives fine, in forward and reverse, and no lurch. But there is some engagement when starting. Do I need to adjust the hydro linkage or the trunion? Thanks

You have to adjust the cam bracket. This is discussed on page 2-55 of the Chassis service manual. If you don't have it, you can download it here. http://www.onlycubcadets.net/forum/s...ead.php?t=4642

Yes i have the manual, thanks.