Only Cub Cadets - 48" or 60"

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)

- - 48" or 60" (https://www.onlycubcadets.net/forum/showthread.php?t=21392)

IliketheRedcubs

11-30-2012 10:30 AM

48" or 60"

I am considering buying a rear blade for my 2072... Is a 48" rear blade wide enough? Also, if you have a haban blade on the front, can you operate the two together or one at a time? :HeadScratch: Thanks! :beerchug:

riesedesperado6170

11-30-2012 12:40 PM

they will run at the same time as far as i now. i would go to 60" my self because when you angle it you lose width so 48 you may be less then your tractor width when it is angled. I have a 60" myself

IliketheRedcubs

11-30-2012 01:07 PM

Quote:

Originally Posted by riesedesperado6170 (Post 162243)

they will run at the same time as far as i now. i would go to 60" my self because when you angle it you lose width so 48 you may be less then your tractor width when it is angled. I have a 60" myself

I suppose a Tractor Supply blade is too heavy...?

cub123

11-30-2012 01:55 PM

If you can find one the brinly BB 1010 5ft blade is a perfect fit
http://i1192.photobucket.com/albums/...1351982294.jpg
There are a few company's that make a cat 1 that's about the same size that could be made to fit too.

Sam Mac

11-30-2012 06:01 PM

Ben

That orange blade would look much better on my BX than your Red 982:biggrin2:

cub123

11-30-2012 06:59 PM

Quote:

Originally Posted by Sam Mac (Post 162265)

Ben

That orange blade would look much better on my BX than your Red 982:biggrin2:

:biggrin2::biggrin2:

All times are GMT -4. The time now is 11:16 PM.