![]() |
Tiller recommendations for a BX or what else to use
Guys
I'm thinking about buying a 48" tiller for my Kubota BX 2660. Looking for recommendations. Edit: I had this posted in the implements area but it looks like it fits here better. I plan on trying my hand at doing a small garden and thought a tiller was the hot setup but as you can see those that know more about this than I do are talking me out of the tiller idea. So now tell me what should be thinking about. I suck at making stuff grow and need all the help I can get. |
Quote:
After two seasons, the tiller had turned his garden into "concrete", the tilth was gone. I ain't saying not to get one, I am just hinting not to go slow, it will destroy the soil structure. Definition of TILTH 1 : cultivated land : tillage 2 : the state of aggregation of a soil especially in relation to its suitability for crop growth This thing is much safer: http://i1104.photobucket.com/albums/...032640x476.jpg AND cheaper! :bigeyes: :bigthink: |
1 Attachment(s)
John
I'm new to this plowing or tilling thing so I welcome any suggestions. Blowing up rock and crushing it I know how to do. You have been to my place tell me how you would do it and what to use. This is what I have at the moment. |
Quote:
OR Since you've already got a plow to turn the soil with, you could get a single or double gang set of discs to break up the turned soil. The only downside to this is, as opposed to the cultivator listed above, you won't be able to use it again to cultivate between rows for weed control during the growing season. |
You've got the right idea with the plow. It's a good place to start! I agree with CAD. You can over-till, and he is right about going too slow. Plow, hit it once with a tiller and you should be good to go. Bush Hog makes a good tiller for the money. Used them before quite a bit. They aren't bad. If your interested in a really, really good tiller, about the best one out there is made by Howard. It's called a Rotavator. I have no idea where the closest dealer would be. Look at them, if you want help finding a dealer, I'll help you. We had one on our farm. It was the best tiller I've ever seen!! Here's a link to a site that shows them.
|
What is the intended purpose of the tiller? :bigthink:
Vegetable garden? Flower beds? Lawn renovation? Enjoying springtime? (that is my tilling duty purpose! :biggrin2:) A $3k purchase is takes up a lot of storage space, if it is used 15 minutes a year. But, then a dragster costs more and is used less time! :bigeyes: If it is to get grass to grow behind the house, I would be buying hay, thinly covering the area every couple months until the grass looks better than a golf course. |
Quote:
If the plow and a cultivator will do the job I'm all good with going that way. One thing that I'm concerned about with the tiller idea is that my land has an abundance of rocks so I'm worried I could destroy the PTO on the BX even with a slip clutch. Thoughts? |
Quote:
Rent a walk behind tiller, if you want to prep the soil after plowing. The 4 foot wide tiller would be useless for weed control, especially if there is any grade to the garden. |
Think you guys just saved me a couple grand. Thank you.
Moved the thread so that I can get info on what tools I should be thinking about. I have a plow and a ripper shank. I like the idea of renting a walk behind if I am only going to need it once in a while plus I don't need to worry about tearing up the BX. |
Quote:
I think a disk and a small field cultivator would do you good. Land Pride makes excellent tillage/dirt tools. (They have good tillers too.) Here is their disk........ Disk This tool is a very good leveler/finisher....... Soil Pulverizer This is a good style field cultivator. The shovels on it need replaced with cultivator sweeps though (You can get the cultivator shovels at Rural King also)......... Field Cultivator (BTW) Most tillers have a lot of built in protections for hitting rocks. I have honestly seen FAR more rear PTO tore out of a tractor on a Bush-Hog than anything. Usually not from hitting something.... but from a U-joint breaking and it flipping that long shaft around! |
| All times are GMT -4. The time now is 06:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.