Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   Oil useage (https://www.onlycubcadets.net/forum/showthread.php?t=37774)

Old Skool 03-19-2015 08:40 PM

Oil useage
 
I have a cub 1210 that has the mag 12 engine in it. Engine sounds and runs strong, no funny sounds to it and not a trace of smoke anytime, not even at start up. Problem is, when you mow for about 3 hours and then check your oil level, its low. The only thing I can think of is the crankcase breather filter needs replaced. I haven't tore into it yet, thought I would check with the experts first to see if I am on the right track.


Dave

Datsun1973 03-19-2015 09:07 PM

It's leaking or burning. Check behind all the tin for oil leaks too. It can be hidden.


Check for oil in your air cleaner which would indicate that oil is getting sucked up into there to be burned in the form of mist. Unfortunately that's usually means rings are starting to go.

I'd say run it and keep the oil topped up.

J-Mech 03-19-2015 09:09 PM

Quote:

Originally Posted by Old Skool (Post 317668)
Problem is, when you mow for about 3 hours and then check your oil level, its low.

How low is "low"? Lower than when you started? Or it was on the "Full" mark and now it's on the "Add" mark..... :bigthink:

Old Skool 03-19-2015 09:34 PM

Cant remember for sure how low it was, but I do know it was low enough on the dip stick that I felt it needed some. I am going off memory as this was last year. Its not my main mower just a backup. I do run Pennzoil 30wt.

J-Mech 03-19-2015 09:44 PM

Why don't you use it some this year and find out for sure how much it's burning. Since your going off of memory, maybe it isn't as bad as you remember.

Terry C 03-19-2015 09:57 PM

Quote:

Originally Posted by J-Mech (Post 317692)
Why don't you use it some this year and find out for sure how much it's burning. Since your going off of memory, maybe it isn't as bad as you remember.

What oil do you use in single Kohlers Jon?

Terry

ccpullin 03-19-2015 11:27 PM

Quote:

Originally Posted by Old Skool (Post 317668)
I have a cub 1210 that has the mag 12 engine in it. Engine sounds and runs strong, no funny sounds to it and not a trace of smoke anytime, not even at start up. Problem is, when you mow for about 3 hours and then check your oil level, its low. The only thing I can think of is the crankcase breather filter needs replaced. I haven't tore into it yet, thought I would check with the experts first to see if I am on the right track.


Dave

Is all the tin on the engine and the flywheel screen clear so it cools properly? Also are you running it at full throttle for the fan to move enough air to cool the engine?. An engine that is running hot will use oil.

J-Mech 03-20-2015 12:47 AM

Quote:

Originally Posted by Terry C (Post 317697)
What oil do you use in single Kohlers Jon?

Terry

The brown, dead dinosaur kind. :biggrin2::biggrin2:

J-Mech 03-20-2015 12:48 AM

Quote:

Originally Posted by ccpullin (Post 317712)
Is all the tin on the engine and the flywheel screen clear so it cools properly? Also are you running it at full throttle for the fan to move enough air to cool the engine?. An engine that is running hot will use oil.

Running the engine below WOT does not mean it is overheating. Nor, will it run too hot below WOT.

Old Skool 03-20-2015 06:12 AM

Engine/tractor is really clean, im kinda picky about that. Tractor does run at WOT when mowing and the engine is clean no leaks anywhere. As far as worn rings, I was under the impression that you would have a lack of power/visible smoke when running. It seemed like I have heard that if the breather filter was bad, you would consume oil. Am I right on my assumption and what I heard about the filter?


Dave


All times are GMT -4. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.