1864 carb
 

I pulled my carb apart to clean it. Its a keihin # 24 053 32 and it looks to have 1 adjusting needle with spring behind the solenoid. How many turns out should that screw be. Thanks

I also need the 2 tiny o' rings that go on that crossover tube and was wondering of the best place to get them and maybe the mating gaskets as well. Other than that I think that's all I need on my carb. What's the compression test readings suppose to be around on the command 18.

Did you try looking for parts here?

http://www.cubcadet.com/webapp/wcs/s...5-A/0030850025


I have a service manual for the CH motor I can e-mail you if you need it.

I'm sure I can get the parts but thought some of you guys maybe had some tricks to getting them quicker. I would really appreciate if you could send me the service manual. Thanks

Hi , I bought mine from Lakota Racing. Those little o rings are 3.50 each. I bought a few other things and they charged $17 shipping UPS. Everything would have fit in a small flat rate box. I don't know if they have mating gaskets, you might be better off with a whole kit. Hopefully you can do better. Mike

Could try ace Hwd. "O" rings there go from $ .03- .29 cents each.
Just a thought:bigthink:

I will next time. Those things are really really small. You blink your eye and they're gone. Mike:biggrin2:

Nope I tried ace hardware and they weren't small enough. They had the smallest that I had in my kit.

Whatever you buy, make sure it's compatible with E 10. Otherwise, the commercially available stuff may turn to mush.

I sent the manual to the e-mail listed in your profile. :beerchug:

Unfortunately, you are going to have to wait for the parts...... unless you run to your local CCC dealer, there is no "fast" way to order parts. I linked the CCC site more so you had a way to get part numbers, I wasn't necessarily suggesting you order from them. If I must buy from CCC, I buy from here: http://www.cubcadetpartsnmore.com/ They are out of Iowa and I get parts within 2-3 days.