Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   Mag 20 starter issue (https://www.onlycubcadets.net/forum/showthread.php?t=38225)

Old Skool 04-13-2015 02:09 PM
Mag 20 starter issue
 
I have a 2072 that the starter bended doesn't always engage. I have cleaned it and tried a dry lube on it, but still hangs up some. What do you guys do on this?

J-Mech 04-13-2015 02:59 PM
Clean the bendix screw shaft good and put a heavy oil on it. Guys will say to use dry lube because of dirt sticking ..... yadda yadda, but I've done it that way for years. Tried other "dry" lubes too.... had better luck with oil.

ol'George 04-13-2015 04:03 PM
Quote:
Originally Posted by J-Mech (Post 322236)
Clean the bendix screw shaft good and put a heavy oil on it. Guys will say to use dry lube because of dirt sticking ..... yadda yadda, but I've done it that way for years. Tried other "dry" lubes too.... had better luck with oil.
I'm with ya kid, dry lube just don't work for me either. :beerchug:

jimbob200521 04-13-2015 04:31 PM
Quote:
Originally Posted by ol'George (Post 322250)
I'm with ya kid, dry lube just don't work for me either. :beerchug:
Still talking about tractors? :bigthink:

J-Mech 04-13-2015 04:36 PM
Quote:
Originally Posted by ol'George (Post 322250)
I'm with ya kid, dry lube just don't work for me either. :beerchug:
Haven't been called that in a while.... :bigthink::biggrin2::biggrin2:


Quote:
Originally Posted by jimbob200521 (Post 322252)
Still talking about tractors? :bigthink:
:bigeyes::bigeyes: :biggrin2::biggrin2::biggrin2:

Sam Mac 04-13-2015 04:37 PM
Why do I think this thread has gone very bad? :bigthink:

I was going to go into more detail but it would have been :banned:

ol'George 04-13-2015 08:09 PM
J. Mech,
I agree with your post of using grease on the helix of the starter
over running clutch.
(I Tried Dri-slide too) too much graphic er graphite
Hope this clarifies things you perverts Ha,LOL! :biggrin2:
kaint tipe, I'm laughing to much.

Sam Mac 04-13-2015 08:15 PM
Quote:
Originally Posted by ol'George (Post 322277)
J. Mech,
I agree with your post of using grease on the helix of the starter
over running clutch.
(I Tried Dri-slide too) too much graphic er graphite
Hope this clarifies things you perverts Ha,LOL! :biggrin2:
kaint tipe, I'm laughing to much.
ol'George you have a dirty mind. :biggrin2::ExtremeFunny::LMAO1::ROTF1::ROTF2:


All times are GMT -4. The time now is 03:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.