122 Electrical question
 

I got the new wiring harness hooked up, new battery installed, double check all my connections with the wiring diagram. I'm not electrically inclined by the way.... Just for curiosity I wanted to see if it turned over and nothing happened, neighbor came over and said maybe the neutral switch is bad so he disconnected and put a jumper wire in place, still nothing.
Anyone have any ideas what could be wrong?

Was the 122 working running before? Why did you replace the wiring?

It didn't have any wiring, only things it had were voltage regulator, coil, starter, solenoid, and neutral switch. I had to buy an ignition switch and a harness for it.

Are you sure, it is wired correctly....???

And, the Neutral Safety Switch is temporarily jumpered out.....???

I followed Mike's labels and double checked the diagram he sent. We pulled the plug on the neutral switch and jumped a wire from one side of the plug to the other.

122 has a clutch/brake switch but no "neutral" switch.

Maybe that's what that is on the underside of the frame, the parts diagram said neutral switch. The one thing I didn't check is if the battery was charged, but I assumed since it was new it would be.

Is the tractor wired per the #5 diagram contained here.... ?? Wiring Diagram

Yes, here is a few pictures if that helps.

I smell fresh paint. Check all the grounds on the starter solenoid, s/g, and the grounds on the dash tower.