Only Cub Cadets - Locating pin

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)

- - Locating pin (https://www.onlycubcadets.net/forum/showthread.php?t=39487)

Group_44

06-16-2015 11:34 AM

Locating pin

1 Attachment(s)

What are the dimensions of the locating pin(#23) for a 1641 coupling? Mine is getting chewed up trying to get it off the old engine, it is listed as NLA, looks simple to make but I don't have a good pattern.

Sam Mac

06-16-2015 12:13 PM

I looked up the pin for a LT2180, same part number Cub Cadet 711-3330 Pin, Locating, .352 Dia x 1.156

Group_44

06-16-2015 08:19 PM

2 Attachment(s)

Thanks, just what I needed,I used a piece of an old Triumph head stud and turned it down to fit. It was easier having the correct dimensions than trying to guess.

darkminion_17

06-16-2015 11:16 PM

nice work.:beer2:

Group_44

06-17-2015 01:03 AM

It took a couple of tries to get it right, my old Atlas lathe is pretty sloppy, but in the end the pin fit nice, it was within .001".
:beerchug:

Sam Mac

06-17-2015 07:46 AM

Looks good to me. :beerchug:

All times are GMT -4. The time now is 09:34 PM.