ISO 2 stroke ignition guru
 

Lots of talent here, so I'll give this a try.

1978 Honda Hobbit PA50II
magneto ignition with points, coil with external condenser
Problem: no spark

If anyone wants to play along, I'll post all my diagnostic info on here.

Any takers?

Go......I'll play.

Bring it on!

It's been 2 hours.... you got a question? :Unknown:

Maybe he checked the kill switch or the key :bigthink:

If he has a problem with a 3 stoke sinusoidal encapsulation valve causing the bi-directional sleeve valve to convolute the electro magnetic field to reverse polarity he can try inversing the vari-valve accumulator ball valve to restore retro firing of the after burner causing the directional reversing of the power piston.
That should rectify the platinum ferro deposit transfer.:beerchug:

Looks like maybe his interweb went down too.

Looks like some interest. Nice day out, yard work to be done.
I have a lot of info to post; might take me the rest of the afternoon to get it on here.
Start off with photos of the parts.
http://www.onlycubcadets.net/forum/p...pictureid=6663
http://www.onlycubcadets.net/forum/p...pictureid=6664
http://www.onlycubcadets.net/forum/p...pictureid=6665

How about start with what you know/don't know. We all know what the parts look like....:beerchug:

OK. It will take a couple posts.
Stator and points:
Points are new Honda OEM, set at 0.014"
Resistance measurements for stator, measured with points open.
red-green 2.1 ohms
red-yellow 2.5 ohms
green-yellow 1.4 ohms
black/green 1.9 ohms
green-frame 0.2 ohms