Only Cub Cadets - 882 with a 1A tiller

Page 1 of 2

Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)

- - 882 with a 1A tiller (https://www.onlycubcadets.net/forum/showthread.php?t=43282)

bsb369

03-24-2016 04:44 PM

882 with a 1A tiller

1 Attachment(s)

Ok, been collecting parts and doing A LOT of research and finally got my tiller to work with my 882. I bought a cat 0 hitch from Extreme Motor Works, and a factory adapter kit off of eBay. I ended up with a 5/8 X 165 inch outer length belt which is a gates B162. I just wanted to post what belt length I came up with in case anyone else is planning on doing this kind of setup.

longislandcubs

03-24-2016 04:50 PM

882 looks great.

bsb369

03-24-2016 05:00 PM

Thanks, it's my first smoker and I'm pretty happy with it

cubcadet

03-24-2016 05:02 PM

It looks great.

ACecil

03-25-2016 12:39 PM

Nice smoker and tiller!

finsruskw

03-25-2016 01:53 PM

Can you clue us in on the "factory adaptor kit" amounts to??
As t what it consists of and such?
Any pictures?
I'd sure like to hang my #2 on my 882 as well.

Thanks!

bsb369

03-25-2016 06:06 PM

I will take some pictures and post them hopefully by tonight...I ended up making a latch plate because the factory kit was about 5/8 of an inch too short.

bsb369

03-25-2016 07:38 PM

1 Attachment(s)

This the latch plate I made longer that bolts to the tractor

bsb369

03-25-2016 07:39 PM

1 Attachment(s)

This is the part that bolts to the gearbox

bsb369

03-25-2016 07:40 PM

1 Attachment(s)

These are the lift arms

All times are GMT -4. The time now is 07:14 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page