Qa-36
 

Good Morning Guys!

I am faced with a decision and I need your input. I currently have a 147 with a 36 thrower. I recently purchased a 882. I am contemplating selling the 147 with the lawn deck and possibly the thrower but here is the question. Is it a reasonable thought to modify the mounting mule to go onto the 882 or just find the blower to fit it? I was talking to Rob Houtz and he suggested just add an inch or so to make it wider.
your thoughts??

thanks in advance- Pete

If you are handy will modification,fabrication, metal cutting and welding, anything is possible.

If not, just acquire the correct snow removal equipment for the 882.

Get a QA42A and be done with it. You just have to change the input pulley I have one on a 782 works great.I even have an extra one I might sell.

MIKE, please take a peek and let me know if you have on you might sell.
thanks-pete

Get the right blower. A 36" isn't even as wide as the tractor anyway. Sell the 36".

I have one needs to be painted but not bad.Just get a 4''x3/4'' Bore B groove pulley .If you are going to AJ's I will talk to you