Gt 3235
 

I have a Cub Cadet GT 3235 with a horizontal shaft Kohler command 25hp engine in it and it is running rich. I took the air breather off the engine and the fuel comes up through 2 holes while I roll it over. It is extremely easy to start when it's cold but when it's hot it pours too much fuel into it. When it's running it spits and sputters because it's getting too much fuel. When I idle it down to shut it off it dies. Can anybody give he some pointers on where to start?

Sounds like you have some crap in the Carb. My guess is the needle and seat.

That was kind of my thought but not familiar at all with these engines and the carb setup with the intake on top of the motor.