Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   General Talk (https://www.onlycubcadets.net/forum/forumdisplay.php?f=24)
-   -   Maple Hunter customer service. (https://www.onlycubcadets.net/forum/showthread.php?t=49239)

olds45512 07-03-2017 05:47 PM

Maple Hunter customer service.
 
1 Attachment(s)
The tunnel cover decal on my 108 is starting to have some of the chrome come off the decal, I put these decals on 3yrs ago. I contacted Maple Hunter and they are sending me a new one at no charge with free shipping. Not only are the decals a great value but they back it up if there's an issue.

bill682 07-03-2017 06:03 PM

Wow, that is incredible in this day and age.
Maple Hunter Texas or Indiana?

J-Mech 07-03-2017 06:04 PM

Good to hear Tim. :beerchug:

Question though... I thought the original decal had a clear laminate over it. Does the replacement not have that?

olds45512 07-03-2017 06:26 PM

Quote:

Originally Posted by bill682 (Post 426322)
Wow, that is incredible in this day and age.
Maple Hunter Texas or Indiana?

Texas. Ten characters

olds45512 07-03-2017 06:27 PM

Quote:

Originally Posted by J-Mech (Post 426323)
Good to hear Tim. :beerchug:

Question though... I thought the original decal had a clear laminate over it. Does the replacement not have that?

I dont believe so.

finsruskw 07-03-2017 07:28 PM

My last 2 decal were from MH. The 126 from a year ago and my recently completed 104 this past spring.

On both dash decals, after lining up the holes for the ammeter and steering column, the slot for the throttle lever had not enough material on the 126, left the original turtle and rabbit sticking out from under the decal w/the decal rabbit and turtle showing above as well as 1/4' of the dash tin showing on the sides.

On the 104, too much mat'l on the left side where the excess draped down into the slot, and not enough on the right side leaving about 5/16" of the dash tin showing.

There is no way their decal was tested for fit on an actual dash tin.

Cubfan79dad 07-03-2017 07:48 PM

I got their set for my 100
I messed up the headlight sticker.
I called to purchase another one and they wouldn't let me buy it, they sent free

olds45512 07-03-2017 07:48 PM

Quote:

Originally Posted by finsruskw (Post 426328)
My last 2 decal were from MH. The 126 from a year ago and my recently completed 104 this past spring.

On both dash decals, after lining up the holes for the ammeter and steering column, the slot for the throttle lever had not enough material on the 126, left the original turtle and rabbit sticking out from under the decal w/the decal rabbit and turtle showing above as well as 1/4' of the dash tin showing on the sides.

On the 104, too much mat'l on the left side where the excess draped down into the slot, and not enough on the right side leaving about 5/16" of the dash tin showing.

There is no way their decal was tested for fit on an actual dash tin.

Unless they own every model of Cub they wouldn't be able to test fit, i'm sure most of their decals are made from pics and measurements given to them.

J-Mech 07-03-2017 07:56 PM

Quote:

Originally Posted by olds45512 (Post 426331)
Unless they own every model of Cub they wouldn't be able to test fit, i'm sure most of their decals are made from pics and measurements given to them.

That and, a dash tin is stamped. I'd be willing to bet they vary some. If the decal was made to fit one in particular, it may not fit all exactly. Remember the tin was originally painted, not decaled. :beerchug:

clay1811/44c 07-03-2017 10:02 PM

Quote:

Originally Posted by olds45512 (Post 426324)
Texas. Ten characters

I bet Texas has more than 10 characters. Sorry just had to.


All times are GMT -4. The time now is 11:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.