Only Cub Cadets - Driveshaft coupler

Page 1 of 3

Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)

- - Driveshaft coupler (https://www.onlycubcadets.net/forum/showthread.php?t=51158)

IliketheRedcubs

01-22-2018 08:28 PM

Driveshaft coupler

1 Attachment(s)

My 1772 has a driveline similar to the 2072. It’s converted over. So, last night I thought I’d go for a quick ride. Went to raise the blade and it quit. Moved the hydro lever and no movement. So this is what I found!

Jeff in Pa

01-22-2018 08:54 PM

I make replacement couplers if you want one. Both splined and smooth shaft pump input.

IliketheRedcubs

01-22-2018 09:02 PM

Quote:

Originally Posted by Jeff in Pa (Post 444730)

I make replacement couplers if you want one. Both splined and smooth shaft pump input.

This is a splined one.

Jeff in Pa

01-22-2018 09:07 PM

I can't find a picture but I do make a splined one with the ball bushing

Jeff in Pa

01-22-2018 09:37 PM

1 Attachment(s)

Quote:

Originally Posted by Jeff in Pa (Post 444734)

I can't find a picture but I do make a splined one with the ball bushing

Found a picture of one "in process"

finsruskw

01-23-2018 09:22 AM

You mean it WAS a splined one LOL!!

DoubleO7

01-23-2018 02:28 PM

Quote:

Originally Posted by finsruskw (Post 444768)

You mean it WAS a splined one LOL!!

What does the male counterpart look like?

Terry C

01-23-2018 04:50 PM

Quote:

Originally Posted by DoubleO7 (Post 444779)

What does the male counterpart look like?

X2! Can’t be good enough to just put a new coupler on.
Maybe Jeff’s have more spline to engage “unused” splines IDK.

CubDieselFan

01-23-2018 06:14 PM

I have one of the couplers that Jeff makes for the supers. I have not used it yet but I did a test fit and it will work fine when I use it. Mine was worn but not as bad as the op's.

Edit, the shaft was not worn any at all.

Jeff in Pa

01-23-2018 07:29 PM

Quote:

Originally Posted by Terry C (Post 444784)

X2! Can’t be good enough to just put a new coupler on.
Maybe Jeff’s have more spline to engage “unused” splines IDK.

I make the splined section a little longer to get to the unused portion.

All times are GMT -4. The time now is 07:13 PM.

Page 1 of 3

Show 40 post(s) from this thread on one page