Only Cub Cadets
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   1641 With Vanguard Fuel Solenoid (https://www.onlycubcadets.net/forum/showthread.php?t=54700)

Sooner 03-23-2019 04:55 PM
1641 With Vanguard Fuel Solenoid
 
I’ve removed the top of the carb for cleaning. Very dirty, old fuel,etc. I noticed the fuel solenoid won’t move when the key is turned to the on position. Looking for ideas. Thanx

RLause 03-23-2019 05:06 PM
Are you getting 12 volts to the solenoid?

Alvy 03-23-2019 05:26 PM
Que Sam stopping by to tell you to cut off the stem in 3,2,1............

Sooner 03-23-2019 05:33 PM
Quote:
Originally Posted by RLause (Post 479717)
Are you getting 12 volts to the solenoid?
I will check after the rain shower

Sam Mac 03-23-2019 06:00 PM
Quote:
Originally Posted by Alvy (Post 479718)
Que Sam stopping by to tell you to cut off the stem in 3,2,1............
What he said. :biggrin2::beerchug:

Sooner 03-23-2019 06:08 PM
Quote:
Originally Posted by Sam Mac (Post 479723)
What he said. :biggrin2::beerchug:
So.... this isn’t needed? What was it’s intended purpose? Thanx

Alvy 03-23-2019 06:17 PM
Quote:
Originally Posted by Sooner (Post 479724)
So.... this isn’t needed? What was it’s intended purpose? Thanx
Anti backfire solenoid. Immediately shuts fuel delivery off so it doesn’t ignite from combustion temps after ignition is killed after shut down

Sooner 03-23-2019 06:42 PM
Quote:
Originally Posted by Alvy (Post 479725)
Anti backfire solenoid. Immediately shuts fuel delivery off so it doesn’t ignite from combustion temps after ignition is killed after shut down
Thanks for the reply. I’m getting 12 volts to the solenoid. Are these serviceable?

dale c. 03-23-2019 07:55 PM
use a small pair of needle nose pliers and work it back and forth it might just be stuck ?

Sam Mac 03-24-2019 11:00 AM
1 Attachment(s)
Just a FYI Briggs offers a plug to replace the solenoid. :beerchug:


All times are GMT -4. The time now is 07:49 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.