Need large gear for 147 elec lift
 

Guys,
I have a Cub 147 with electric lift. The large spiral gear in this electric lift assembly is very worn in one area and needs replaced. Cub part number IH-530793-R1.
Any one have a good used or new one?
Cell: eight one four- four 3 four- 8 six five nine
Regards,
Chris and Cheryl

Did You try either of these Two Places
https://ccspecialties.org/
https://cubcadetusedparts.com/
Myself I adapted a 4-inch Thompson actuator that Johnny Products sells to replace my OEM Duff-Norton actuator But I can't remember which 4-inch actuator I bought. Whether it was for their sleeve Hitch or Johnny Bucket Lift

Because Now I have to buy another Bucket Lift actuator so I can use the Johnny Products actuator speed-up kit. Then I'll have an electric actuator that is as fast as a hydraulic lift. Always hated the speed of the OEM Duff-Norton actuator, which is too slow for Blade or thrower work. :ThumbsUp:

Sargent, Folks.
Thanks for the reply.
I have a call into CCspecialties. They are closed on Friday. My guess these old parts are getting tough to find?
I also called Rob at cubcadetusedparts. He did not have one.
I think Zippy1 gave me this lift when I was working on this tractor 10 plus years ago?
Regards,
Chris and Cheryl

Thought of One More Place https://www.ihccw.com/ But call He is Only Open Monday through Thursday and He has 3 Shipping containers of stuff he hasn't gone through yet so even if your don't see it On the website He Might Have it :ThumbsUp:

Sergeant,
Thanks! I have a call in to him and will follow up next week too. He has the part listed. We will see if it is available.

https://i.postimg.cc/W3ww7v4Y/IMG-20...-201939620.jpg

https://i.postimg.cc/prVYG6hW/IMG-20...-095851708.jpg


Regards,
Chris and Cheryl

Guys,
I found the gears new from OEM mfg but they only sell in packs of 4 I only need one. Any one need a couple of these? We could share the cost. They are about $100 each.
Regards,
Chris and Cheryl

I though Duff-Norton Might still make them. Glad You found one:ThumbsUp:

Sergeant,
Yes found them, just don't really need 3 extra From Duff-Norton
A good used one would be nice. Must be one out there in the weeds some where?
I did get the new bearing that goes around that gear. So we are getting closer.
Spoke to the Cub Guy in North East Ohio. Greg did not have any of these lift part. The items are 50+ years old! Not too much demand.
Regards,
Chris and Cheryl

Was this the Greg https://cubcadetusedpartsshop.com/ ?

Sergeant,
No it was Greg at Denmark Cubs , Denmark Ohio.
I am still searching for a good used Spirord gear.
Regards,
Chris and Cheryl