[Methos]

Originally Posted by Methos

Have you checked the timing? The plug should be gapped at .035.

http://www.onlycubcadets.net/forum/s...ead.php?t=4405

Originally Posted by Specialized

So Im reading this and if I understand correctly, I need to have the points gapped at .020 anywhere but when the S on the flywheel is visible through the shroud??

It just says first, gap the points at .020, then rotate the motor in the normal direction and look in at the sight hole when the points break.

No the plugs should be gapped at .035 and check out the guide via the link I posted before. Good luck!