View Single Post
  #2  
Old 10-14-2009, 01:13 PM
truckntran truckntran is offline
Senior Member
 
Join Date: Aug 2009
Location: Texas
Posts: 392
Default

Quote:
Originally Posted by thenrie View Post
I have searched through the archives and haven't found an answer to this specific tire question. Will 26X12X12 ags fit under the fenders of my 1650. I have an old set of 23X10.50X12 turfs on it, but would like to move to ags. I'd like the extra width of the 26X12s, but don't know whether they'll fit under the fenders. Anybody tried it?

I would also like to get a narrower set of ags for moving earth and snow. Will 26 or 23X8.50s (depending on the answer to the above) work on the 8.50 width rims?

There is plenty on the ag vs turf question.

TTH
Measure how much room there is between the turf tire and your fender.. subtract 1.5 inches and it should tell you how much space the 26 will leave you with..(26-23)/2 =1.5...

My gut feeling is there should be plenty of room..

If you are concerned about the inner sidewall hitting do the same calculation with 10.5 and 12 inch width, should be 3/4 inch more tire to stick out from where it does now.

Either tire will work on the 8.5 rim, altho the narrow rim will tend to make the tread on the ag tire convex rather than flat. if you are entering garden tractor pulls you will do better with a wider rim.

I wouldn't bother with two sets tho.. either size will work fine, especially if you add weight.
__________________
Quietlines and narrow frames, mostly projects but I mow with a 1200 and have a 122 set up for pulls. Wandering the country bringing towers to wind farms everywhere, and bringing yellow stuff home to Texas. Also into flatfender jeeps.
Reply With Quote