Quote:
Originally Posted by ACecil
Thanks for the great progress pics!
|
Quote:
Originally Posted by Matt G.
Looking good...If I were you'd I'd put a few washers between the bracket and the oil filter mount to get the lines a little further away from the driveshaft.
|
The pictures are deceiving, there's a good 1.5" between that lower line and the drive shaft. My rag joint was shot when I pulled the engine, it was basically spinning on (1) of the (2) bolts.
Even as bad as that was it would not have swung far enough to hit the lines where they are at now. If you look at where the bracket attaches to the frame rail, I have it under the rail, I could move it the top, but really feel there is no need.