[Methos]

Originally Posted by inboardnut

Got a little time to work on the tiller mount tonight. First thing I did was turn the left lift arm around. Sure looks better from the back.

But, Looks like I will need to cut off about 3" of the PTO shaft. That was the main reason the tiller was being forced to the right. In one pic you can see the white soapstone mark where it will probably be cut.

Next will be a trip to Farm & Fleet or TSC to see if I can find a longer cat "0" center link .


Looks like I will have to pull the gearbox off the tiller to drain and flush it out. I do not see a drain plug.

.......getting closer!

Your getting there!