Chip
Sounds like you have one hole that is not firing. Check and see if the one that is rich looking is actually firing, if not you probably have a bad coil. Also sounds like it may be a little lean if the other CYL is white. You may want to post in the engine section something like "Kohler 25 problem". I also see that you posted the same on MTF so I’d also hit the engine section there.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|