Quote:
Originally Posted by inspectorudy
It is pretty easy to add the double valve to your tractor. Rich at Patton's , our sponsor above, has the entire valve and hoses that you need. You will also have to swap out the single lever for the double lever from another tractor. Most of our tractors already have the two holes in the front for the fittings. I almost did it when I put in my power steering but decided that I didn't use a blade enough to warrant it. They come up on ebay once in a great while but Rich will have them now and he is fair with his prices.
|
You don't need a different valve or different levers. Just find any donor late model Cub, 1641 thru 2182 and get the valve/lever and lines off it. The valves just stack on top of each other. There is a small pipe that you will need that goes between the valves that you will have to buy. I'm not sure of the part number for the pipe I have bought them from Ken at Carter Gruenewald or Scott at Madson's The lines are not hard to make. You can add up to three valve with no problem. I added four to one 2284 but it is a tight fit. I can take some pictures when I get out to the farm.