I posted this on my build thread , but should of put it here. so I will..
I worked on the lever control this morning. all I had was the piece thats screwed into the pump. the stock lever is way to short and you need to lean up to use it. so this is what I came up with. amazing what you can do with a torch.
I can work the lever with my wrist resting on my knee. in the center position the knob is 4" from my knee, when I pull it back its an inch or so from my knee. and Ive climbed on and off , on the pump side and had no issues with the lever being in the way. so Im calling that part done. now for the hydro lines.
