782 update
Nothing better to do on a 100 degree day than to go through the mower deck. Welded up some cracks, overhauled to front scalping roller, pad welded some wear points, sharpened the blades with out taking them off. Got everything on the tractor and the good new is the PTO works fine. Bad news is the bad bearing was the center spindle. Anyone know what bearing number (ie SKF602, etc) is used in the spindle? Anything out of the ordainary to look for when replacing. Will most likely do all three spindles. All free advice is happily accepted I believe it is a 1980, deck is 44" Thanks
|