Thread: My 1977 1250 QL
View Single Post
  #2  
Old 08-29-2012, 07:09 AM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,684
Default

Quote:
2. While looking closely at the pan, I noticed the lower half of both rear ISO mounts is destroyed. Is there supposed to be an upper and lower rubber rear ISO mount, or is this supposed to be one piece of rubber? Thankfully the fronts are both good and solid.


Quote:
4. The local dealer told me to change the trans filter and simply replace any fluid lost out of the hydrostat, rather than change all the hytran due to cost (~$7/qt was quoted). Does this sound right? For some reason this makes my bs meter start pegging.
You can use whatever fluid you want. Hytran is what is recommended by Cub Cadet for a number of reason. It is less expensive to purchase Hytran at a Case/IH dealer. Take a couple of gallon containers and you can purchase Hytran from a bulk tank.

Quote:
Did IHC use one common harness for these tractors? Mine doesnt have lights
YES, the QL harnesses were all the same. Lights were optional on the 1250.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote