DIZ JR,
I like you're system,but you're chains look like there on inside out. The opening on the clevises for the cross links, should be faced out so they don't wear into the tire.
THENRIE,
I don't know how much is to much. I have never heard anyone say thay have had to much and coused problems. I have about 110lb on the wheels and another 250lb in a weight box on the back plus me at 260lb and I like it . no spining when pushing snow or dirt unless I want to. I would like to get the weight of the back and on or in the wheels somehow.
I am thinking of finding a piece of well casing that fits all the way in the wheel. welding the end up with plate thick enough to counter sink the nuts ,with 4 tubes welded inside for the caraige (sp) bolts to go through to the wheel. Then fill with sakrete and used lead wheel weights. I am guessing I can get around 125-150 lbs a peice ,if they stick out past the wheel an inch or two.
joe
__________________
Sold everything but one.
1211-snow pusher, cab ,54 inch plow, loaded tires (all 4) Gilson wheel weights, X-trac fronts- soon to have power steering and dual hydraulics
|