Thanks for all the comments on the AMC stuff as well as the Cub. The Jeep has a 360 to answer that question.
So getting back to the "O" I took several pictures tonight of the progress in the past few days, but photobucket has completely changed the format
Anyway I disassembled the axles and noticed these bushings are a little wore. So the question is are they replaceable and if so where do I get the parts?
I took the brake drum out and the liner looks pretty good.
Special thanks to Duke who noticed on my very first post I was missing the emblem and he sent one to me free of charge
Of course I will pay him back with something in the very near future!
I scrapped the grease flaking paint and crud for about an hour and the frame is a little cleaner. It also doubles as a work bench!
So once i scrape it a little more I will clean the whole frame and components with 409 or some sort of degreaser, wet sand the stamped steel, sand blast the cast parts, clean it off with hot thinner and prime it a couple of coats. Not sure if I dive into the engine once the frame is primed or what, but the project is coming along well!