Stuck steering wheel
I didn't really like hammering on the shaft, so I tapped 2 holes at a slight outward angle and used a harmonic balancer puller. I tapped the holes at an angle so the bolts would go thru the slots in the puller . I used a 10 -32 tap. Worked great . Chris
__________________
1968 104 , service replacement '96 K301, 42" deck
1997 Scotts 42502X8 , repowered with '96 B&S 18hp TwinII , 42" deck
2007 LA130,21hp Intek v-twin, 48" deck
 As you slide down the banister of Life, may the splinters point in the right direction . 
|