Zippy the cam bracket is bolted on the left side of the hydro pump as you are sitting on the tractor. It should be fastened on with 2-12 point bolts. It would be a L shaped bracket with elonggated slots for up and down adjustment. Loosen the fasteners just a little so there is still a little tension on the bracket and tap the bracket either up or down depending on which way the wheels are creeping. Have the tractor on jackstands before doing this. Hope this helps. Kelly
__________________
1641, 1541, 682 with 18hp command engine and hydraulics from a 782. 1872 with a power angle blade.
|