Quote:
Originally Posted by rsteadman23
I have a model 104 that I use almost weekly to mow about 2 1/2 acres. Last week as soon as I started mowing the motor generator belt broke and the PTO belt came off. I assumed at the time that the motor generator belt caused to PTO belt to come off. I replaced the Motor Generator belt today and put the PTO belt back on because it still seemed to be in good shape. I went to mow a test area and the PTO belt immediately came off. I put it back on and tried again and this time the blades did not spin at all and white smoke came from the front and the belt came off again. Am I doing something wrong with this belt or could the PTO clutch possibly need to be replaced? Thanks for any help you can give me.
|
I would check the pto clutch, also check you deck bearings and that your belt tension is set properly that the spring or adjuster is in good repair and properly adjusted..
__________________
126 in surgery with weights, spring assist, 3 point and sleeve hitch
100 with woods finish mower and rear lift,
Nice 125 with super nice sweepster, 1782 Super Diesel,
1650,782D in surgery, 102 parts tractor..
3 Brinley plows, Brinley cultivators , rear scrape blade, front plows and custom built bedder attachment.
|