If you're going to put it on a dedicated loader tractor, get rid of the lift handle (it's in the way anyway, or at least it is on my 124 FEL) and make up a forward/reverse pedal to go in its place. Use two strong springs with an adjustable mount on the ends of both springs (this begs for a drawing but I don't have time at the moment) so you can adjust the pedal until it re-centers at neutral. You want return springs so the hydro can't fly to full speed ahead if your foot slides off...that could be deadly on a loader. You may also need some kind of damper. Strong springs might be enough to damp out the oscillation you'd induce if your foot slid off the pedal. I haven't tried this yet, so I don't know. I'll be making one (and probably drawing plans) when I build up a 682 for my loader.
|