Thanks for the tips guys.
When the PTO is turned on, the bronze button is definitely not touching the PTO. I tightened the blades with an impact wrench, so I'm relatively certain that the blades aren't slipping. Later today, I'll get her in grass and when it stop, I'll hop off and inspect the pullies, belts and such and report back.
The thing is, my Cub came with a PTO in a box of parts, but the thing is, the set screws were ALL stripped out. I didn't have any easy outs, so I just took the PTO off of my beater Cub that has seen a lot of hard use. So I'm wondering if the PTO on the beater was shot. I did order some easy out bits in case I need to swap PTOs.
|