No Kohler Timing Marks
Similar problem! I have Kohler K321 on a Case 444, with starter/generator system, and I too cannot locate the S mark on the flywheel. The bearing plate has 2 half moon cutouts around the starter/generator but no S mark on the flywheel. This Kohler is on a Case 444. I have removed the blower housing, wire wheeled the surface and looking with trouble light. Based on compression stroke, I can ascertain approximately where the mark should be, but nothing. The black line is where it might be based on TDC.
Also, the bearing plate has a raised line on the inside carb side, hidden by the blower housing but the housing has no sight hole at all.
Can anyone help?
|