Didn't realize this pic was taken but I guess it works
Got all the Cubs out and got some good wrench time in. Changed the oil and filter in the 1330 and replaced a deck hanger nut that apparently had fallen off, used the 1050 as a jumper for 127, and replaced the solenoid on the 127 as well as started the long process of replacing the wiring harness. Also pulled the back wheels off and adjusted/checked the brakes, fixed the choke cable clip, and adjusted the throttle cable. Tried to pull the dash top of the tower off but the flat head screws were so rusted I accidently broke one off (after soaking repeatedly in PB Blaster
). Then ended the day with a short cruise with the g/f and a friend on all three. Was a good day!
