Welcome to the best Cub site on the net. Although these machines are near bullet proof they do wear out in the driveline area. When my son and I took the driveshaft and clutch out of our 102 the driveshaft looked more like a camshaft than a driveshaft with one area worn about halfway through and it still worked!!. As Grampie said take a look at the roll pins. It is best to have the rear off the ground, the engine running and in gear. Sometimes a roll pin will shear off in the shaft but both ends will still be sticking out making it look ok.
__________________
With my son, EricR Super 2084 with 54" mower, 451 blower. 2086 with 3 pt hitch, 54 inch deck, 551 blower, 54 in brinly blade. A 4 digit original w deck. A 70 with deck. 2 102s both with 42 in decks, one with creeper, 1 36 inch IH snow thrower CW36, 1 42 inch IH blade. 149 with mower. 2072 w 3 pt hitch, Johnny bucket, 60 in mower, 451 blower. Jacobson GT 10 with mower. DR Lawn vac tow behind,Home made lawn roller. Brinly cart, 2 off brand carts and 1 home made cart.
|